X BANNER LITE

---

A very light weight and economical x-banner designed for short term event use. These units use a frame in the shape of an "X", held together at a hub in the middle (back) of the display.  The "X" design gives you a tension rod at each corner of the display.  The graphic has a grommet (reinforced hole) in each corner which fits over the tension rod.  Comes in a light fabric bag.

Design Notes
The sizes for this stand is flexible. The width can be between 500-600mm and the height can be between 1650mm-1800mm Any changes will alter the upright angle so if you are producing graphics for multiple displays please ensure that they all are the same dimensions.

The grommets are about 30mm from the edge in all four corners so avoid putting important things like logos in the corner.

Construction Notes
The best construction for the X-Banner Lite is to print your graphic on Matt Poster Paper followed by a Matt Laminate. Please note that if using your display stand for a trade show overseas you may be required to use fire retardant media such as our EXPO banner.